Remove the Tank from your device. Open the top piece by turning in an anti-clockwise direction. This reveals the filling area. and add liquid - avoid the centre tube/airhole and be careful not to overfill. If this is your first time using the tank or you have just replaced the atomiser you will need to prime the coil before you can use the tank. To do this simply drip a couple drops of eliquid onto the top of the atomiser head until the material within the coil has thoroughly soaked through and changed colour.
Important Note: Priming the coil ensures you do not get dry hits or burn the wick within the coil. Failure to do so may result in a harsh burnt taste that will not go away until the atomiser has been replaced.
The final step is to place a piece of tissue paper over the threaded end and give a sharp blow through from the mouthpiece end. This removes any liquid that may have managed to accumulate in the centre hole as you do not want this to get into your device, or back into your mouth.
Take Care with threads: When bringing items together that have threads - back them up in reverse direction until they engage properly, before turning in correct direction to tighten. This will reduce the possibility of cross threading.
For more information please click here